2017 best painting contractor

2018 2nd best painting contractor

ABOUT US

Kertusha Painting is a family owned and operated company with Italian roots located in Flathead Valley, Montana serving Kalispell, Columbia Falls, Whitefish and Bigfork. We also serve the Missoula, Helena, Great Falls, Bozeman and Billings areas. 

If you are looking for professional painters anywhere in Montana, Kertusha Painting is your one stop, hassle free solution. We are a full-service painting company that specializes in both interior and exterior painting. We work on residential and commercial properties. Kertusha provides outstanding customer service for each job. Our company has been in business since 2015, and we have earned the trust of countless community members. Kertusha Painting takes pride in delivering quality work and going above and beyond to ensure each customer is 100% satisfied. Kertusha is fully insured and we hire only qualified, professional painters and we all have a high attention to detail. 

2019 Daily Inter Lake

Here is a Step by Step how we start and complete every project: 

Interior 

1. All surfaces that are not be painted are protected from drips and/or overspray by covering all furniture, floors, lights, doors and windows by using Sherwin Williams 3M masking plastic, tape, paper and drop clothes.

2. All surfaces that are to be painted will be cleaned, sanded and prepped as needed prior to primer and/or paint is applied.

3. Any imperfections that the walls of ceilings might have will be speckled, textured and sanded in order for them to look even after paint is applied. 

4. All Kertusha's projects are done using mainly Sherwin Williams paint, but we

also use Benjamin Moore and Rodda when necessary or when requested. 

5. Sherwin W. ProMar 200 Zero VOC Interior Latex Primer is used in all our residential projects. 

6. Sherwin W. SuperPaint Interior Acrylic Latex or SW Emerald Interior Acrylic Latex Paint are the paints used in all our residential projects. 

7. As many coats of paint as needed are applied in all of our projects. 

8. Sherwin W. PowerHouse caulk is applied where trim meets walls. 

9. Surfaces of doors, windows, trim and other that will need painted will be cleaned, sanded and prepped as needed in order to smother and clean all surfaces prior to painting. 

10. Painted doors, trim, windows and other surfaces are painted using SW ProClassic Waterborne Interior Acrylic Enamel.

11. Stained doors trim, windows and other surfaces are stained using SW Sherwood Wiping Stain. All surfaces and sides are saturated with stain. After few seconds all the excess stain is wiped off using rags. 

12. Stained doors trim, windows and other surfaces are finished using SW Sher-Wood Moisture Resistant Lacquer. Two to three coats are applied. Sanding in between coats is done to achieve smoother surfaces. 

13. SW Putty is applied to all nail holes on stained Windows, Trim and Doors. 

14. At completion of painting all the masking will be taken off the furniture and all surfaces will be cleaned and left as it was before painting. 

WE WELCOME REQUESTS FOR SPECIALTY FINISHES: EPOXY FLOORING, VENETIAN PLASTERS, CABINET STAINING, FAUX FINISHES AND MORE. 

 

Exterior 

1. All surfaces that are not be painted are protected from drips and/or overspray by covering all furniture, floors, lights, doors and windows by using Sherwin Williams 3M masking plastic, tape, paper and drop clothes.

2. All surfaces that are to be painted will be cleaned, sanded and prepped as needed prior to primer and/or paint is applied.

3. SW Big Stretch caulk is applied where siding meets trim, where trim meets trim and where needed. 

4. SW SuperPaint Exterior Acrylic Latex is applied to all surfaces that require paint. 

5. Trim, Siding, Corbels, and Soffits will be sanded and scraped if paint and stain is pealing and in other spots where the stain and paint is old and powdery which also needs to be removed prior to applying the new coatings. If the project is a new construction then this does not apply. 

6. SW Woodtech Semi-Transparent or Semi-Solid Oil Alkyd UV Stain is applied to wood surfaces like siding, trim, beams, posts, glue lams and more...

7. At completion of staining or painting all debris will be removed and surfaces will be cleaned as needed.

WE WELCOME REQUESTS FOR SPECIALTY FINISHES: CONCRETE STAINING, FENCE STAINING/PAINTING, PECKER HOLE FIXING, DECK STAINING, DECK BUILDING AND MORE. 

Kertusha Painting 

P.O. Box 4397

Whitefish, MT 59937

For Estimates or Questions 

Contact Our Office

406-407-5436

kertusha.painting@gmail.com

  • 406 Woman Magazine
  • Facebook
  • Twitter
  • Houzz